English
Graphite Electrode
HEIBEI WELL CARBON
Home > Products > Graphite Electrode
Metallurgical Casting Materials
Carbon Electrode
Needle Coke
High Purity Graphite
Refractory Materials
Aluminum Smelting Carbon Materials
Graphite Powder
Other Graphite Products
Electrode Paste
Steel Parts
RP 300MM Graphite Electrode with Nipple T3N
RP electrode uses ordinary grade petroleum coke production, the raw material requirements are not high, graphitization temperature is low, so its resistivity is high, linear expansion coefficient is large, thermal shock resistance is poor, the allowable current is low, suitable for ordinary steelmaking.
HP 500mm Graphite Electrode with Nipple T4L
HP electrode is made of high quality petroleum coke plus needle coke and coal asphalt. After impregnation, the performance is higher than RP electrode, the resistivity is relatively low, and the current density is large. HP is suitable for high power electric arc furnace of 400Kv.A/t per ton.
UHP 600mm Graphite Electrode with Nipple T4L
UHP graphite electrode used in high power electric arc furnace steelmaking, it has low resistivity, big volume density, high mechanical strength, small linear expansion coefficient and the characteristics of oxidation resistance optimal, can shorten the steelmaking time, increase production efficiency
UHP 450mm Graphite Electrode with Nipple T4L
UHP is short for Ultra High Power and stands for ultra high power graphite electrode category. UHP graphite electrode using high-level needle coke production, graphitization temperature up to 2800 ~ 3000 ° C, graphitization in a string of graphitizing furnace, heat treatment, then its lower resistivity
Inquire Basket (0)
+86 159 3330 9942
+86 175 3109 5369
vivien@well-carbon.com
viviencheng64