HEIBEI WELL CARBON
Home > Products
UHP Graphite Electrode
HP Graphite Electrode
RP Graphite Electrode
Other Graphite Products
UHP 450mm Graphite Electrode with Nipple T4L
UHP is short for Ultra High Power and stands for ultra high power graphite electrode category. UHP graphite electrode using high-level needle coke production, graphitization temperature up to 2800 ~ 3000 ° C, graphitization in a string of graphitizing furnace, heat treatment, then its lower resistivity
UHP 600mm Graphite Electrode with Nipple T4L
UHP graphite electrode used in high power electric arc furnace steelmaking, it has low resistivity, big volume density, high mechanical strength, small linear expansion coefficient and the characteristics of oxidation resistance optimal, can shorten the steelmaking time, increase production efficiency
High Power Grade HP450mm Graphite Electrode Foundry Graphite Electrode
According to the design characteristics of the electric arc furnace, the electrode suitable for the production of the EAF should be selected reasonably, and the product with the best cost performance should be selected.
UHP 600x2400mm Graphite Electrodes for Electric Arc Furnace(EAF)
At present, among the three methods of open-hearth furnace, converter furnace, and electric arc furnace (EAF) steelmaking, the proportion of electric furnace steel reaches about 30%.
HP 400 Graphite Electrode High Power Graphite Electrode
The resistivity of the graphite electrode is a physical index that reflects the electrical conductivity of the electrode.
RP 300MM Graphite Electrode with Nipple T3N
RP electrode uses ordinary grade petroleum coke production, the raw material requirements are not high, graphitization temperature is low, so its resistivity is high, linear expansion coefficient is large, thermal shock resistance is poor, the allowable current is low, suitable for ordinary steelmaking.
High Density Low Consumption Graphite Electrode UHP EAF Graphite Electrode for Ladle Furnaces
The consumption of graphite electrodes in EAF steelmaking depends not only on the quality of the electrodes, but also on the level of steelmaking operations and management.
Graphitized Petroleum Coke for Recarburizer Graphite Electrode GPC
Graphitized Petroleum Coke is to put the oil coke in the graphitization furnace and make the oil coke free after a high temperature of about 3000 degrees.
HP 500mm Graphite Electrode with Nipple T4L
HP electrode is made of high quality petroleum coke plus needle coke and coal asphalt. After impregnation, the performance is higher than RP electrode, the resistivity is relatively low, and the current density is large. HP is suitable for high power electric arc furnace of 400Kv.A/t per ton.
Supply 98.5% Carbon CPC GPC as Carbon Raiser Carbon Additive
Calcined petroleum coke is a kind of petrochemical product, whose raw materials is green petroleum coke.
High Power Graphite Electrode HP 500 Graphite Electrode with Oxidation Resistant Coating
When connecting, use compressed air to blow the electrode socket, electrode end face and the nipple clean, no dust and abnormal objects embedded.
Electrode paste is a conductive material for ferroalloy furnace, calcium carbide furnace and other electric furnace equipment. The electrode paste has the characteristics of high temperature resistance and low coefficient of thermal expansion. It has a relatively small resistance coefficient, which can reduce the loss of electric energy.
Inquire Basket (0)
+86 159 3330 9942
+86 175 3109 5369